■商品概要 BAR DIAMETER:1” CENTER WIDTH:7.25” CLAMP AREA BAR DIAMETER:1” COLOR:Black DRILLED:Yes END RISE/RISE/HEIGHT:14” FINISH:Gloss,Powder-Coated MADE IN THE U.S.A.:Yes MATERIAL:Steel MODEL:Ape Hanger,Bagger OVERALL WIDTH:36.5” PULLBACK/SWEEP:5.75” SIZE:14” SPECIFIC APPLICATION:Yes STYLE:Custom Replacement TYPE:Handlebar
■詳細説明 ・Paul Yaffe says,”Give instant attitude to your Bagger with a freshnew set of ape hangers!” ・Mandrel-bent from 1”seamless steel tubing and then treated to achrome bath or gloss black powder coat ・Notched for electronic throttle ・Knurled,dimpled and pre-drilled for internal wiring ・Available in 10”,12”,14”and 16”heights ・Made in the U.S.A.
■注意点 ※取り扱い説明書は英語となります。 ※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。 ※Bars listed for 94-17 FLHR/FLTR will also fit most 84-17 modelswith 31/2”on-center risers (except Springers, FLT/FLHT and XL883C/1200C models). ※When installing any of these bars on 2007 and earlier models, theone-piece top handlebar riser clamp OEM #55918-08 (or PART#0603-0363) MUST be used. ※Bars listed for 94-17 FLHR/FLTR will also fit most 84-17 modelswith 31/2”on-center risers (except Springers, FLT/FLHT and XL883C/1200C models). ※When installing any of these bars on 2007 and earlier models, theone-piece top handlebar riser clamp OEM #55918-08 (or PART#0603-0363) MUST be used.
BAR DIAMETER:1”
CENTER WIDTH:7.25”
CLAMP AREA BAR DIAMETER:1”
COLOR:Black
DRILLED:Yes
END RISE/RISE/HEIGHT:14”
FINISH:Gloss,Powder-Coated
MADE IN THE U.S.A.:Yes
MATERIAL:Steel
MODEL:Ape Hanger,Bagger
OVERALL WIDTH:36.5”
PULLBACK/SWEEP:5.75”
SIZE:14”
SPECIFIC APPLICATION:Yes
STYLE:Custom Replacement
TYPE:Handlebar
■詳細説明
・Paul Yaffe says,”Give instant attitude to your Bagger with a freshnew set of ape hangers!”
・Mandrel-bent from 1”seamless steel tubing and then treated to achrome bath or gloss black powder coat
・Notched for electronic throttle
・Knurled,dimpled and pre-drilled for internal wiring
・Available in 10”,12”,14”and 16”heights
・Made in the U.S.A.
■注意点
※取り扱い説明書は英語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※Bars listed for 94-17 FLHR/FLTR will also fit most 84-17 modelswith 31/2”on-center risers (except Springers, FLT/FLHT and XL883C/1200C models).
※When installing any of these bars on 2007 and earlier models, theone-piece top handlebar riser clamp OEM #55918-08 (or PART#0603-0363) MUST be used.
※Bars listed for 94-17 FLHR/FLTR will also fit most 84-17 modelswith 31/2”on-center risers (except Springers, FLT/FLHT and XL883C/1200C models).
※When installing any of these bars on 2007 and earlier models, theone-piece top handlebar riser clamp OEM #55918-08 (or PART#0603-0363) MUST be used.
■適合車種
Road Glide (EFI) - FLTR 2007 - 2009
Road Glide (EFI) - FLTR 2007 - 2009
Road Glide - FLTR 1998 - 2002
Road Glide - FLTR 1998 - 2002
Road Glide Custom - FLTRX 2010 - 2013
Road Glide Custom - FLTRX 2010 - 2013
Road Glide Ultra - FLTRU 2011 - 2013
Road Glide Ultra - FLTRU 2011 - 2013
Road Glide-Injected - FLTR-I 1998 - 2006
Road Glide-Injected - FLTR-I 1998 - 2006
Road King (EFI) - FLHR 2007 - 2017
Road King (EFI) - FLHR 2007 - 2017
Road King - FLHR 1994 - 2006
Road King - FLHR 1994 - 2006
Road King Classic (EFI) - FLHRC 2007 - 2013
Road King Classic (EFI) - FLHRC 2007 - 2013
Road King Classic Injected - FLHRC I 1998 - 2006
Road King Classic Injected - FLHRC I 1998 - 2006
Road King Custom (EFI) - FLHRS 2007
Road King Custom (EFI) - FLHRS 2007
Road King Custom - FLHRS 2004 - 2006
Road King Custom - FLHRS 2004 - 2006
Road King Custom Injected - FLHRS I 2004 - 2006
Road King Custom Injected - FLHRS I 2004 - 2006
Road King-Injected - FLHR-I 1996 - 2006
Road King-Injected - FLHR-I 1996 - 2006